Dive Gear with Full Warranties & Fast Free Shipping

Contact Us

We offer CCR Cylinder Sets configured for use with closed-circuit rebreathers. They are aluminum or steel, pre-configured for use as oxygen and diluent in your choice of sizes. The oxygen cylinder has a green handwheel and includes a green and white oxygen decal. The diluent cylinder has a black handwheel and includes a red and white diluent decal. Labels are shipped loose so that you may apply in the appropriate position. The valves are Thermo 200-Bar DIN modular valves or we also offer cylinders configured with the special APD valves for use with the Inspiration and Evolution. The valves are configured by default as shown: Oxygen on divers right, outlets facing away from diver. Or if you prefer a different configuration, in the special instructions at checkout let us know what rebreather model with oxygen on divers left or right and valve outlets facing away from or toward the diver. Both cylinders and valves are nitrox ready so if you decide to configure them differently, you can change it yourself just by swapping the handwheels.

The cylinders are a pair of Luxfer/Cataline brushed no-coat aluminum cylinders, Faber cold gavanized white steel cylinders, or Worthington hot-dipped galvanized steel cylinders. Both cylinders are oxygen clean with oxygen compatible valves. We ship the cylinders with the valve installed and a few PSI pressure of oxygen compatible air necessary to keep the interior dry. The cylinders have a current month Visual Inspection Sticker; no re-inspection is necessary before filling.

Rebreather Gas Cylinder Specifications
Cylinder	Service Pressure (psi)	Diameter (inches)	Height* (inches)	Weight Empty (pounds)	Buoyancy* Full : Empty (pounds)
Aluminum 13 (Luxfer 2L)	3000	4.38	13.1	6.0	- 1.7 : - 0.7
Aluminum 19 (Luxfer 3L)	3000	4.38	18.6	8.2	- 1.4 : + 0.1
Aluminum 20 (Catalina 3L)	3000	5.25	13.8	9.2	- 1.4 : - 0.0
Steel 15 (Faber 2L)	3442	3.94	14.2	6.6	- 2.4 : - 1.2
Steel 23 (Faber 3L)	3442	3.94	19.5	8.6	- 2.6 : - 0.7

* Height/Weight is cylinder only, i.e. less valve. All values are approximate.
* Bouyancy is calculated with standard K valve in seawater.
Cylinder set would be slightly more negative with the supplied modular valves.

Tek Tip

Advice for Traveling with Rebreather Cylinders Regardless of the brand of rebreather it can be annoying to travel with cylinders because they are carefully examined by security personnel, and occasionally even confiscated. TSA says cylinders are allowed in checked baggage only if the cylinder has an open end. This means you must remove the valve and you must not plug the cylinder opening. Nothing should obscure the cylinder opening, not even just clear tape or a plastic bag. This also means the open cylinders that traveled with you in checked baggage are contaminated and no longer suitable for oxygen service. Have a plan for how you are going to have them oxygen cleaned at the destination. Consider taking the cylinders with you as carry-on baggage, where you can remove a travel cap yourself during security inspections. You may prefer to rent cylinders at the destination or ship the cylinders ahead by a package carrier where the cylinders may be sealed during transport.

---

We offer Bailout Packages pre-configured for use with rebreathers. Included in the package is a brushed no-coat aluminum cylinder and Deluxe Strap Kit in your choice of size: 19, 30 or 40 cubic feet with a 200-Bar PRO DIN/K valve and a Dive Rite balanced regulator with an In-Line Cutoff Valve and Miniature SPG.

Click image for high-resolution ENLARGEMENT

Bailout package includes the following items: Cylinder and valve Dive Rite Reg (RG1208 1st/RG2015 2nd) OmniSwivel Cutoff Valve Over Pressure Relief Valve 40-Inch regulator hose 22-Inch inflator hose Miniture SPG Dive Rite Deluxe Strap Kit The entire package is Nitrox Ready, fully assembled and ready-to-dive.

Bailout Gas Cylinder Specifications
Cylinder	Service Pressure (psi)	Diameter (inches)	Height* (inches)	Weight Empty (pounds)	Buoyancy Full : Empty (pounds)
Aluminum 19 (Luxfer)	3000	4.38	18.6	8.2	- 1.4 : + 0.1
Aluminum 30 (Luxfer)	3000	4.88	21.9	11.6	- 1.0 : + 1.2
Aluminum 40 (Luxfer)	3000	5.25	24.6	15.3	- 0.7 : + 2.3

* Height/Weight is cylinder only, i.e. less valve. * Bouyancy is calculated with standard K valve in seawater.
Bailout configuration would be approximatetly 2 lbs more negative.

Image	Item		Description	Ship	Price
		Note: In-Stock, but it takes us 1-2 days to configure and ship these packages
		Note: These packages include Modular valves and Oxygen/Diluent decals
	DBLAL13		CCR Pair of AL-13 Cylinders w/Modular Valves	1-2 Days	$345.00
	DBLAL19		CCR Pair of AL-19 Cylinders w/Modular Valves	1-2 Days	$384.00
	DBLAL20		CCR Pair of AL-20 Cylinders w/Modular Valves	1-2 Days	$384.00
	DBLFX15		CCR Pair of FX-15 Cylinders w/Modular Valves	1-2 Days	$518.00
	DBLFX15APD		CCR Pair of FX-15 Cylinders w/APD Valves (Evolution)	1-2 Days	$538.00
	DBLFX23		CCR Pair of FX-23 Cylinders w/Modular Valves	1-2 Days	$538.00
	DBLFX23APD		CCR Pair of FX-23 Cylinders w/APD Valves (Inspiration)	1-2 Days	$558.00
	B a i l o u t   P a c k a g e s
	FXBAIL19		CCR Bailout Package w/AL19 cylinder	1-2 Days	$549.00
	FXBAIL30		CCR Bailout Package w/AL30 cylinder	1-2 Days	$559.00
	FXBAIL40		CCR Bailout Package w/AL40 cylinder	1-2 Days	$569.00
No surprise costs.     No Tax and shipping is FREE for US orders over $35.

Having trouble finding something?     Type one or two words into the text box above.  Then click the Search button to search our site.

Still having trouble? Send an e-mail, or call her (Toll-Free) at 866-498-6857 Mon-Fri, 9:00 am - 5:00 pm Eastern She'll see what we can do for you.

Home  |   About Us  |   Contact Us  |   Training Center  |   Library  |   Policies E-mail A Link To This Page To A Friend (or Yourself) © Copyright 2008   |   Terms & Conditions   |   Privacy Statement