Dive Gear with Full Warranties & Fast Free Shipping |
|
|||||||||
| Home | BCs | Computers | Essentials | Exposure | Gas / Tanks | Hardware | Lights | Logowear / Media | Rebreathers | Regulators | Tools |
O2ptima Rebreather AccessoriesOn This Page: Carry On Bag | Sensor Cable | Dsix Plate and Foot | Storm Case | Handset PocketCanister Caps | Solenoid Cap | Inline Shutoffs | Spares Kit | Pricing |
| [ Click for Prices ] |
|
Carry On Bag for O2ptimaThe O2ptima Rebreather Carry-On Bag from Dive Rite allows divers to protect their O2ptima when traveling by carrying the critical rebreather components on-board an airplane. Made from 1680 denier ballistic nylon, the O2ptima Rebreather Carry-On Bag is lightweight, yet tear and abrasion resistant. Completely padded, the bag includes extruded polyethylene stiffeners to protect the O2ptima if the airline decides the bag must be checked, rather than carried on-board. |
|
Organized with two removable trays, the O2ptima Rebreather Carry-On Bag holds the O2ptima head and electronics, regulators, loop, counterlungs and tools and even an off-board rebreather compatible computer. The trays easily flip open to reveal the various O2ptima components, allowing you to show the O2ptima to airport security without removing (and losing) any parts. The O2ptima low weight frame and fabric cover can easily be placed into checked baggage. |
|
|
|
|
Weighing in at only 25 lbs/11 kg when loaded and 5lbs/2.25 kg empty, the bag is 2lbs lighter than other bags of its size. This weight difference can mean all the difference when packing an extra tool kit or dealing with the airport's non-calibrated scale. The O2ptima Rebreather Carry-On Bag also meets the current size requirements for carry-on luggage of most major airlines. Dimensions: 19-inches L x 14-inches W x 9-inches H/(48.2 cm L x 35.6 cm W x 23 cm H) |
|
| [ Click for Prices ] |
 |
4th Sensor Cable for O2ptimaThe Dive Rite O2ptima design has provisions for an independent Oxygen monitoring solution, including space for a fourth oxygen sensor in the cell array. The after market 4th Sensor Cable uses a Fischer SE103 connector to link with an independent dive computer; compatible with Delta-P VR3 and the forthcoming Dive Rite NiTek X. The 48-inch long sensor linking cable also includes a sealing gland, sensor connector and requires an oxygen sensor, sold separately. Installation consists of unscrewing the sealing gland plug and screwing in the sealing gland and cable assembly. If your O2ptima rebreather does not have a sealing gland port for the fourth sensor linking cable, contact us for further information. |
| [ Click for Prices ] |
|
Dsix O2ptima Plate and FootThis after market one-piece Dsix O2ptima Plate and Foot is solid aluminum and designed to withstand much more than normal usage. It offers an ultra stable platform for the O2ptima and allows the entire rebreather to be assembled and disassembled in a upright position. It will accommodate all recommended cylinder sizes from the aluminum 13's to the Steel 30's. This ultra high quality plate and foot combination weighs about 7-pounds with about 4-pounds negative buoyancy. It is manufactured using 1/4-inch thick 5052 alloy aluminum stock with TIG welding. Each plate is hand built by a professional welder (who is also an O2ptima diver) and every piece is checked for proper fit and finish many times during the build process. All edges are sanded smooth and the hose cutout is buffed to a very smooth finish to prevent chaffing. |
| [ Click for Prices ] |
|
O2ptima Storm CaseThe Dive Rite Storm Case by Hardigg is designed to transport and protect your O2ptima even under the most adverse conditions. Made from lightweight strong HPX Resin, the Storm Case has a watertight O-ring seal and is guaranteed for life. The O2ptima Storm Case boasts telescoping handles that lock in place plus rugged in-line wheels for fast and comfortable transport. Press and Pull latches hold tight even under duress, yet open effortlessly. Permanently attached Vortex valve automatically adjusts air pressure without letting in water. Add the security of your own lock to unbreakable, molded-in hasps. Double-layered, soft-grip handles combine strength with long lasting comfort. The unique hinges are impact-resistant and create a flat surface for upright stability. |
| [ Click for Prices ] |
|
Handset PocketThe Dive Rite Handset Pocket mounts on any standard, 2-inch harness waist strap and is typically used to store the secondary handset to keep it from dangling. Divers who monitor their PO2 from a computer connected to a fourth cell, oftentimes use two pockets, one for each handset. There are two versions of the handset pocket available, one version is for the Delrin case handset and the other version is for the previous design metal case handset. |
| [ Click for Prices ] |
|
Canister Dust CapsThe Dive Rite Canister Dust Caps seal the O2ptima canister when the loop hoses are removed, protecting the head and scrubber cartridge from moisture and dust when not in use. These come in handy for those who wish to store their head in dusty areas or a boat where salt water spray is inevitable. The cap for the inhalation canister fitting has left-hand threads (and is marked with a large "L" on the top), whereas the cap for the exhalation canister fitting has right-hand threads. They also serve to protect the threads on the canister fittings when the loop hoses are disconnected. |
| [ Click for Prices ] |
|
Solenoid External Thread CapSupplied by OmniSwivel International, this cap seals the standard 9/16-inch fitting found on most regulator second stages. When the supply hose is disconnected, it protects the inlet threads when traveling and prevents contaminants from entering. Recommended for the O2ptima rebreather to cover the external threads of the oxygen solenoid inlet port when not in use. |
| [ Click for Prices ] |
|
Solenoid Inline Supply ShutoffThe Solenoid Inline Supply Shutoff allows a diver to rapidly isolate the solenoid from the oxygen supply, in case the solenoid starts to leak oxygen into the loop or completely fails in the open position. This allows the diver to keep their oxygen supply valve in the open position and easily control PO2 via manual addition without having to turn on/turn off their supply valve. This can be useful to an already task-loaded diver in a technical dive. |
| [ Click for Prices ] |
|
RiteSource Inline Supply ShutoffThe RiteSource Inline Supply Shutoff kit allows a diver to isolate the RiteSource from the diluent supply, in case of a leak or free-flow from their RiteSource. For those who use the RiteSource in a technical dive for bailout or 'sanity breaths', the ability to isolate is practically a must. Those sport divers who incorporate the RiteSource for on-board bailout may also find this kit useful. |
| [ Click for Prices ] |
|
Regulator Quick Connection AdapterSupplied by OmniSwivel International, this BC Inflator QD Post Adapter attaches to a second stage regulator, where the low pressure hose would normally attach. This tool allows a diver to plug a second stage into the manual addition hose to allow access to the onboard gas supply. Typically the adapter would be used to gain access to the onboard oxygen but could be used to access diluent as well. The Regulator Quick Connection Adapter will not supply adequate gas if the diver is deeper than 20 feet. |
| [ Click for Prices ] |
Recommended Spares KitOur exclusive Dive Rite Express O2ptima Spares Kit includes some of the more commonly needed replacement parts, a good choice for your save-a-dive kit. Our staff O2ptima instructors have carefully selected the most critical items that can cause you to miss a dive if they are misplaced or damaged. This kit is a must if you are travelling with your O2ptima.
|
|
|
|
| Image | Item | Description | Ship | Price | ||
| DRT-93 | Carry On Bag for O2ptima | Today | $175.00 | |||
| D6-FX | Solid Aluminum FX Plate and Foot for O2ptima | Today | $599.00 | |||
| FX-C10o | 4th Sensor Cable for O2ptima | Today | $199.00 | |||
| AC3500 | StormCase for O2ptima | Today | $302.40 | |||
| CO8201 | Wrist Strap, Depth-Compensating, Fits O2ptima, Nitek X | Today | $11.00 | |||
| DRT-9-MET | Handset Pocket (2-inch webbing mount) for metal body handsets |
Today | $32.00 | |||
| DRT-9-DEL | Handset Pocket (2-inch webbing mount) for Delrin body handsets |
Today | $32.00 | |||
| DRT-27CAP | Canister Dust Cap Pair (1 each Left and Right Thread) |
Today | $60.00 | |||
| OSI-QDBC-YFI | Adapter, LP 2nd Stage: 9/16-inch FI to BC inflator QD Post | Today | $14.99 | |||
| OSI-DCS | Dust Cap, LP 2nd Stage: 9/16-inch FI | Today | $14.99 | |||
| DRT-43-2 | Solenoid Inline Shut-off | Today | $129.00 | |||
| DRT-43-3 | RiteSource Inline Shut-off | Today | $158.45 | |||
| DRT-42-1DX | CL Elastic Tiedown Strap Set | Today | $20.00 | |||
| DRT-91FX | Deluxe Spares Kit for O2ptima | Today | $179.95 | |||
| O 2 p t i m a R e p l a c e m e n t P a r t s | ||||||
| DRT-410 | ADV Rebuild Kit | $7.00 | ||||
| DRT-6 | Corrugated Hose, 7-inch (Canister side) | $20.00 | ||||
| DRT-7-10 | Corrugated Hose, 10-inch (DSV side) | $20.00 | ||||
| DRT-10 | O-ring, Coupling and Tee (V90-022) | $1.00 | ||||
| DRT-11-1 | O-ring, Small Blue for Metal Handset Battery Door | $1.00 | ||||
| DRT-11-2 | O-ring, Large Orange for Metal Handset Battery Door | $1.00 | ||||
| DRT-13 | Canister Strap | $8.00 | ||||
| DRT-14 | Checklist, Laminated | $2.50 | ||||
| DRT-16 | Sensor Wiring Harness | $60.00 | ||||
| DRT-18 | DIVA/HUD Assembly and cable | $300.00 | ||||
| DRT-18-CAP | DIVA Sun Cover | $2.00 | ||||
| DRT-23-4-SS | Coupling Retainer Ring, Stainless | $6.50 | ||||
| DRT-24-0 | CL Exhaust Valve | $50.00 | ||||
| DRT-24-1 | CL Exhaust Valve Lock Key | $14.00 | ||||
| DRT-24-2 | CL Plastic Washer | $4.00 | ||||
| DRT-25-S | Inlet Valve - Side Button | $48.00 | ||||
| DRT-25-T | Inlet Valve - Top Button | $48.00 | ||||
| DRT-26 | Canister O-ring Kit, Complete Set | $60.00 | ||||
| DRT-27RED | Canister Coupling - LH Thread | $75.00 | ||||
| DRT-27BLACK | Canister Coupling - RH Thread | $75.00 | ||||
| DRT-27DISK | O2 Sensor Array Holding Disk | $75.00 | ||||
| DRT-27-2 | Solenoid Holder | $95.00 | ||||
| DRT-27-4 | Solenoid w/Connector | $170.00 | ||||
| DRT-29-EX | Valve Cage - Complete, Exhaust of DSV | $5.69 | ||||
| DRT-29-IN | Valve Cage - Complete, Inlet of DSV | $5.69 | ||||
| DRT-31-0 | Clamp for corrugated Hose | $4.00 | ||||
| DRT-31-3M | Diva Mount | $10.00 | ||||
| DRT-31-4 | Diva Knurled Lockdown Screw | $1.75 | ||||
| DRT-34-0 | O-Ring, Solenoid Inside | $1.00 | ||||
| DRT-34-1 | O-Ring, Solenoid Outside | $1.00 | ||||
| DRT-37-1 | Battery Door Conductant/Lubricant | $30.00 | ||||
| DRT-41 | CL Jacket Set | $159.00 | ||||
| DRT-42-3L | Counterlung Set - 3L (Standard) with Valves | $500.00 | ||||
| DRT-42-2L | Counterlung Set - 2L (Small) with Valves | $500.00 | ||||
| DRT-42-1 | CL Retention Strap | $10.00 | ||||
| DRT-57 | Hose Wrap - Long Red | $11.00 | ||||
| DRT-58 | Hose Wrap - Short Red | $9.00 | ||||
| DRT2740G-48 | Oxygen SPG, Green boot w/ 48-inch HP hose | $109.00 | ||||
| DRT2740B-48 | Diluent SPG, Black boot w/ 48-inch HP hose | $109.00 | ||||
| HOLP11B-M | Low-Pressure Hose, 11-Inch, Black (Manifold) 3/8 UNF-Male Both Ends |
$25.87 | ||||
| HOLP22B | Low-Pressure Hose, 22-Inch, Black (ADV) | $25.87 | ||||
| HOLP27G | Low-Pressure Hose, 27-Inch, Green (Solenoid) | $25.87 | ||||
| HOBC40B | Low-Pressure Hose, 40-Inch, Black (Inlet Valve) | $28.60 | ||||
| HOBC40G | Low-Pressure Hose, 40-Inch, Green (Inlet Valve) | $28.60 | ||||
| RG1310-90 | OPV, Oxygen 1st Stage | $24.00 | ||||
| RG1310-140 | OPV, Diluent 1st Stage | $24.00 | ||||
| No surprise costs. No Tax and shipping is FREE for US orders over $35. | ||||||
| Having trouble finding something? Then click the Search button to search our site. |
Still having trouble? Send an e-mail, or call her (Toll-Free) at 866-498-6857 Mon-Fri, 9:00 am - 5:00 pm Eastern She'll see what we can do for you. |
|
Home |
About Us |
Contact Us |
Training Center |
Library |
Policies E-mail A Link To This Page To A Friend (or Yourself) © Copyright 2008 | Terms & Conditions | Privacy Statement |
|